- Back to main navigation
This page provides recommended configurations for installing builds in a specific emulator or hypervisor. This page is by no means exhaustive, and your mileage may vary, so you may have to adjust some settings to your liking as it sees fit.
NeXTSTEP / Apple Rhapsody[edit source]
Currently, only the x86 versions of the NeXTSTEP and the Apple Rhapsody developer releases can be run. There are no emulators that are known to boot the m68k/SPARC/PA-RISC/PPC versions of NeXTSTEP or the Apple Rhapsody developer releases. As a result, only NeXTSTEP 3.1 and above can be run in virtualization software.
Either 86Box or VirtualBox can be used to get an optimal install of NeXTSTEP or Apple Rhapsody.
OPENSTEP 4.2 / Apple Rhapsody[edit source]
86Box Configuration
|
Setting type
|
Configuration
|
Machine
|
- Machine: [Socket 7 (Dual Voltage) i430HX] ASUS P/I-P65UP5 (C-P55T2D)
- CPU type: Intel Pentium MMX, 166 Mhz
- Memory: 48 MB
- FPU: Internal
|
Display
|
- Display: [PCI] S3 ViRGE/DX (375)
|
Input devices
|
- Mouse: Standard PS/2 Mouse
|
Sound
|
- Sound card: [ISA16] Sound Blaster 16 PnP
|
Network
|
|
Ports (COM & LPT)
|
- Port(s): Serial ports 1 and 2 enabled, parallel port 1 enabled
|
Storage controllers
|
- HD controller: Internal controller
- FD controller: Internal controller
- SCSI controller: None
|
Hard disks
|
- Hard drive: IDE (0:0) drive, 2594 cylinders, 16 heads, 63 sectors (1.28 GB)
|
Floppy & CD-ROM drives
|
- Floppy drive(s): One 3.5" 1.44 MB drive (A:)
- CD-ROM drive(s): ATAPI (0:1) CD-ROM drive at 32x speed
|
Notes
|
Apple Rhapsody Developer Release 1 requires the use of the IDE driver from the Apple Rhapsody Developer Release 2 drivers disk, otherwise setup will fail due to being unable to find the hard drive.
The display adapter and sound card can be installed during the Configure.app portion of setup (or if it doesn't install at that point, you can do it after the end of setup).
|
VirtualBox Configuration
|
Setting type
|
Configuration
|
General
|
- Operating System: Other, Other/Unknown
|
System
|
- Base Memory: 64 MB
- Chipset: PIIX3
- Pointing Device: PS/2 Mouse
- I/O APIC: Disabled
- EFI: Disabled
- Processor(s): 1 CPU
|
Display
|
- Video Memory: 9 MB
- Graphics Controller: VBoxVGA
- 3D Acceleration: Disabled
|
Storage
|
- Floppy: One floppy controller
- Hard drive: IDE 2 GB drive
|
Audio
|
- Audio controller: Sound Blaster 16
|
Network
|
- Network adapter: Disabled
|
Serial Ports
|
- Ports: All ports disabled
|
USB
|
|
Notes
|
Apple Rhapsody Developer Release 1 requires the use of the IDE driver from the Apple Rhapsody Developer Release 2 drivers disk, otherwise setup will fail due to being unable to find the hard drive.
The display driver can be found here, which works on OPENSTEP 4.2 and both Apple Rhapsody releases. Alternatively, you can install the VESA VBE 2.0 Display Driver using Configure.app .
|
The i386 and amd64 variants of Linux are able to run on the most common emulators and hypervisors. Older versions with kernel version of 2.4 or older perform best on emulators such as 86Box, PCem or QEMU, while newer versions with kernel version of 2.6 and newer perform best on hypervisors such as VirtualBox or VMware.
Most other variants of Linux are only known to run on QEMU.
86Box Configuration
|
Setting type
|
Configuration
|
Machine
|
- Machine: [i386DX/i486 OPTi 495] DataExpert SX495
- CPU type: Intel i486DX, 50MHz
- Memory: 8 MB
- FPU: Internal
|
Display
|
- Display: [ISA] Trident TVGA 8900B
|
Input devices
|
- Mouse: Microsoft Bus mouse (InPort)
|
Sound
|
- Sound card: [ISA] Sound Blaster Pro v2
|
Network
|
- Network: [ISA16] Novell NE2000
|
Ports (COM & LPT)
|
- Port(s): Serial ports 1 and 2 enabled
|
Storage controllers
|
- HD controller: None
- FD controller: Internal controller
- SCSI controller: [ISA16] Adaptec AHA-154x-C
|
Hard disks
|
- Hard drive: SCSI (0:00) drive, 1024 cylinders, 16 heads, 63 sectors (504 MB)
|
Floppy & CD-ROM drives
|
- Floppy drive(s): One 1,44MB 3.5" floppy drive
- CD-ROM drive(s): SCSI (0:01) CD-ROM drive at 20x speed
|
Notes
|
This configuration applies to all versions of Yggdrasil Linux. During X11 config, put tvga8900b.
|
86Box Configuration
|
Setting type
|
Configuration
|
Machine
|
- Machine: [Socket 7 (Dual Voltage) i430HX] Intel TC430HX
- CPU type: Intel Pentium MMX, 233 MHz
- Memory: 64 MB
- FPU: Internal
|
Display
|
- Display: [PCI] Tseng Labs ET4000 /w32p Rev. D (Diamond Stealth 32)
|
Input devices
|
- Mouse: Standard PS/2 Mouse, Three
|
Sound
|
- Sound card: [ISA16] Sound Blaster AWE32
|
Network
|
- Network: [ISA16] Novell NE2000
|
Ports (COM & LPT)
|
- Port(s): Serial ports 1 and 2 enabled
|
Storage controllers
|
- HD controller: Internal controller
- FD controller: Internal controller
- SCSI controller: None
|
Hard disks
|
- Hard drive: IDE (0:0) drive, 13322 cylinders, 16 heads, 63 sectors (2048 MB)
|
Floppy & CD-ROM drives
|
- Floppy drive(s): One 1,44MB 3.5" floppy drive
- CD-ROM drive(s): ATAPI (0:1) CD-ROM drive at 40x speed
|
Notes
|
This configuration applies to all versions of Red Hat Linux 5.x. During X11 configuration, use the resolution setting of 1024x768x8.
|
86Box Configuration
|
Setting type
|
Configuration
|
Machine
|
- Machine: [Socket 7 (Dual Voltage) i430TX] PC Partner MB540N
- CPU type: Intel Pentium MMX, 233 MHz
- Memory: 128 MB
- FPU: Internal
|
Display
|
- Display: [PCI] S3 ViRGE/GX (385)
|
Input devices
|
- Mouse: Standard PS/2 Mouse
|
Sound
|
- Sound card: [ISA16] Sound Blaster AWE64 Gold
|
Network
|
- Network: [PCI] AMD PCnet-FAST III
|
Ports (COM & LPT)
|
- Port(s): Serial ports 1 and 2 enabled
|
Storage controllers
|
- HD controller: Internal controller
- FD controller: Internal controller
- SCSI controller: None
|
Hard disks
|
- Hard drive: IDE (0:0) drive, 4161 cylinders, 16 heads, 63 sectors (2048 MB)
|
Floppy & CD-ROM drives
|
- Floppy drive(s): None
- CD-ROM drive(s): ATAPI (0:1) CD-ROM drive (52x speed)
|
Notes
|
This applies to both versions 1.0 and 1.2. Disable "Virus Warning" in the BIOS or Corel Linux will refuse to boot.
|
Xandros Desktop/LindowsOS/Linspire[edit source]
86Box Configuration
|
Setting type
|
Configuration
|
Machine
|
- Machine: [Socket 7 (Dual Voltage) i430TX] Soltek SL-56A5
- CPU type: Intel Mobile Pentium MMX, 300 MHz
- Memory: 128 MB
- FPU: Internal
|
Display
|
- Display: [PCI] Cirrus Logic GD5480
|
Input devices
|
- Mouse: Standard PS/2 Mouse
|
Sound
|
- Sound card: [PCI] Ensoniq AudioPCI (ES1371)
|
Network
|
- Network: [PCI] AMD PCnet-FAST III
|
Ports (COM & LPT)
|
- Port(s): Serial ports 1 and 2 enabled
|
Storage controllers
|
- HD controller: Internal controller
- FD controller: Internal controller
- SCSI controller: None
|
Hard disks
|
- Hard drive: IDE (0:0) drive, 4161 cylinders, 16 heads, 63 sectors (2048 MB)
|
Floppy & CD-ROM drives
|
- Floppy drive(s): None
- CD-ROM drive(s): ATAPI (0:1) CD-ROM drive (52x speed)
|
Notes
|
Disable "Virus Warning" in the BIOS or Linux will refuse to boot. If prompted to press enter to restart the computer, reset the machine, as doing this will shut it down instead.
|
86Box Configuration
|
Setting type
|
Configuration
|
Machine
|
- Machine: [Slot 1 i440BX] ASUS P3V4X
- CPU type: VIA Cyrix III, 733 MHz
- Memory: 256 MB
- FPU: Internal
|
Display
|
- Display: [AGP] 3dfx Voodoo 3 3500 TV (NTSC)
|
Input devices
|
- Mouse: Standard PS/2 Mouse, Wheel
|
Sound
|
- Sound card: [PCI] Ensoniq AudioPCI (ES1371)
|
Network
|
- Network: [PCI] AMD PCnet-FAST III
|
Ports (COM & LPT)
|
- Port(s): All ports disabled
|
Storage controllers
|
- HD controller: Internal controller
- FD controller: None
- SCSI controller: None
|
Hard disks
|
|
Floppy & CD-ROM drives
|
- Floppy drive(s): None
- CD-ROM drive(s): ATAPI (0:0), 56x speed
|
VirtualBox Configuration
|
Setting type
|
Configuration
|
General
|
|
System
|
- Base Memory: 256 MB
- Chipset: PIIX3
- Pointing Device: PS/2 Mouse
- I/O APIC: Enabled
- EFI: Disabled
- Processor(s): 1 CPU
|
Display
|
- Video Memory: 32 MB
- Graphics Controller: VMSVGA
- 3D Acceleration: Enabled
|
Storage
|
- Floppy: No floppy controller
- Hard drive: IDE 4 GB drive
|
Audio
|
- Audio controller: ICH AC97
|
Network
|
|
Serial Ports
|
- Ports: All ports disabled
|
USB
|
- USB Controller: USB 2.0 (OHCI+EHCI)
|
VirtualBox Configuration
|
Setting type
|
Configuration
|
General
|
- Operating System: Ubuntu[a]
|
System
|
- Base Memory: 2048 MB
- Chipset: ICH9
- Pointing Device: PS/2 Mouse
- I/O APIC: Enabled
- EFI: Disabled
- Processor(s): 1 CPU
|
Display
|
- Video Memory: 128 MB
- Graphics Controller: VMSVGA
- 3D Acceleration: Enabled
|
Storage
|
- Floppy: No floppy controller
- Hard drive: IDE 20 GB drive
|
Audio
|
- Audio controller: Intel HD Audio
|
Network
|
|
Serial Ports
|
- Ports: All ports disabled
|
USB
|
- USB Controller: USB 2.0 (OHCI+EHCI)
|
86Box Configuration
|
Setting type
|
Configuration
|
Machine
|
- Machine: [Socket 4 i430LX] ASUS P/I-P5MP3
- CPU type: Intel Pentium OverDrive, 133 MHz
- Memory: 16 MB
- FPU: Internal
|
Display
|
- Display: [ISA] Tseng Labs ET4000AX
|
Input devices
|
- Mouse: Microsoft Serial Mouse
|
Sound
|
|
Network
|
- Network: [ISA] Western Digital WD8003E
|
Ports (COM & LPT)
|
- Port(s): Serial port 1 enabled
|
Storage controllers
|
- HD controller: Internal controller
- FD controller: Internal
- SCSI controller: None
|
Hard disks
|
- Hard drive: IDE (0:0) drive, 1015 cylinders, 16 heads, 63 sectors (499 MB), 5400 RPM (1997)
|
Floppy & CD-ROM drives
|
- Floppy drive(s): One 3.5" 1.44 MB drive (A:)
- CD-ROM drive(s): None
|
- ↑ The exact version should be specified if VirtualBox 7 or newer is used.