Template:VMConfiguration/QEMU
QEMU Configuration | |
---|---|
Create the hard drive(s) | |
Unknown | |
Boot to the installation media | |
Unknown | |
Boot to the hard drive | |
Unknown |
Template documentation [view] [edit] [history] [purge]
To list a configuration for QEMU for use in the Recommended VM configurations page, you must use the "VMConfiguration/QEMU" template, which can list the configuration in a structured table.
Usage
QEMU Configuration | |
---|---|
Create the hard drive(s) | |
qemu-img create -f raw disk.img 2G | |
Boot to the installation media | |
qemu-system-i386 -boot d -drive file=disk.img,if=ide -m 768M -drive file=installme.iso,media=cdrom -vga std -rtc base="2002-02-13",clock=vm | |
Boot to the hard drive | |
qemu-system-i386 -boot c -drive file=disk.img,if=ide -m 768M -vga std -rtc base="2002-02-13",clock=vm | |
Notes | |
The system does not reboot on shut down; to restart the computer, close QEMU and run the next command. |
The following code will result in the table above:
{{VMConfiguration/QEMU| |qemuimg = qemu-img create -f qcow2 disk.img 2G |qemuinstall = qemu-system-i386 -boot d -drive file=disk.img,if=ide -m 768M -drive file=installme.iso,media=cdrom -vga std -rtc base="2002-02-13",clock=vm |qemuhdd = qemu-system-i386 -boot c -drive file=disk.img,if=ide -m 768M -vga std -rtc base="2002-02-13",clock=vm |notes = The system does not reboot on shut down; to restart the computer, close QEMU and run the next command. }}
Note: All parameters except notes
are required and failure to provide them will default them to "Unknown".
qemuimg
The command to create the hard drive images.
qemuinstall
The command to boot to the installation media and install the OS on the hard drive image.
qemuhdd
The command to boot to the hard drive.
notes
Any additional notes regarding to the configuration of the machine, such as additional drivers or instructions, can be listed here.